Training

Loading Events

← Back to Events

Kalamazoo – YSC Learning Center

+ Google Map
5737 East Cork Street
Kalamazoo, MI 49048 United States
269-343-4625

      September 2019

      x KALAMAZOO – CSD-1 Boiler Training

      September 11, 2019 @ 9:00 am - 3:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      $225

      Class will cover code requirements for CSD-1 testing and certification, forms needed, how to test and record, and code updates.  There will be a review of current CSD-1 codes, test procedures and recording of information, how to fill out forms for state mandated CSD-1 testing, and best practices and troubleshooting. Meal provided. $225

      Find out more »

      x KALAMAZOO – Combustion Analysis

      September 18, 2019 @ 4:00 pm - 7:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      $40

      Class will cover how to correctly operate a Combustion Analyzer and use it to properly set up and troubleshoot heating equipment. You will learn the set up and use of combustion analyzers, different fuel types and how they affect use of analyzers, how to set up heating equipment at installation, and how to use an analyzer to troubleshoot equipment.  Class taught by Rudy Leatherman.  Meal provided.  $40

      Find out more »

      x KALAMAZOO – Hydronic Installation & Troubleshooting

      September 26, 2019 @ 9:00 am - 3:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      $40

      Class# KZO092619 Class will provide a complete overview of high efficiency boiler systems, including where to apply and not apply, selecting best locations for installation - piping vs. venting - Primary and Secondary loop piping practices. Outdoor reset schedules - how to set up and configure and troubleshooting will also be covered.  There will be a review of systems and applications, installation best practices - where and how to best install, set up of controls and zoning - use of…

      Find out more »

      October 2019

      x KALAMAZOO – Rheem Communicating Zoning & Systems

      October 10, 2019 @ 4:00 pm - 7:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map

      Class# KZO101019 Applying Rheem EcoNet Communicating systems for HVAC, WiFi integration & zoning applications.  You will learn system overview, best practices, components, applications, set up and how to troubleshoot. Meal provided. Free Class.

      Find out more »

      November 2019

      x KALAMAZOO – Ice-O-Matic Training

      November 5, 2019 @ 7:00 am - 11:00 am
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      Ice-O-Matic

      Class# KZOO110519 Ice-O-Matic Service Training Class taught by Eric Diaz. Free class with materials and meal provided. Questions? CLICK HERE to contact Andrew Heney  from Young Supply's Food Service Equipment Division.  

      Find out more »

      x KALAMAZOO – Electricity for HVAC Technicians

      November 12, 2019 @ 3:00 pm - 6:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      $40

      Class# KZO111219 4PM - 7PM Instructed by Glen Beesley and Terry Tarantine - Basics of electricity for HVAC Technicians / Sequence of operation / Basic Diagram reading / Types of motors used in HVAC / Troubleshooting Class will cover basic electrical operation for heating & cooling systems, controls and flow sequence for equipment operation, how to read and follow an electrical diagram and troubleshooting. Meal is provided.

      Find out more »

      January 2020

      x KALAMAZOO – Rheem Water Heater Training

      January 9, 2020 @ 2:00 pm - 6:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map

      Class# KZO010920 Class will provide an overview of water heaters – tank and tankless.You will learn types and efficiencies, installation and maintenance basics.  Troubleshooting of both tanked and tankless with teardown of tankless heaters will also be covered. Taught by Rusty Scaggs $20 class fee includes dinner.

      Find out more »

      February 2020

      x KALAMAZOO – Mitsubishi M&P Class

      February 5, 2020 @ 2:00 pm - 6:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      $40

      Class #KZOO020520 The Mitsubishi Field Service Seminar provides participants with an understanding of the fundamentals of Mitsubishi M&P systems. During this 4-hour seminar, you will be introduced to the concepts and theories of operation – including an overview of the unique technologies employed.- Installation and the fundamentals of M-series and P-series systems.- Inverter technology, components, controls, and benefits.- Overview of product line, application and design criteria.- Functional overview of electrical wiring diagrams and refrigeration cycle diagrams.- Trouble shooting procedures -…

      Find out more »

      x KALAMAZOO – CLASS FULL – Sporlan Refrigeration Training Day

      February 19, 2020 @ 8:00 am - 2:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      $40
      Sporlan

      Class# KZOO021920 CLASS FULL - Multiple Refrigeration topics will be covered – head pressure controls, electronic expansion valves, electronic evaporator pressure controls, Flo-Con valves, CDST valves & Sporlan’s famous “Shootin” Service class. Instructed by David Thomas $40 class fee includes meal. Classes carry 3-5 NATE CEU Credits depending on which NATE CEUs you require. CLASS FULL

      Find out more »

      April 2020

      x CANCELLED – KALAMAZOO – True Service Class

      April 1, 2020 @ 3:00 pm - 7:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      Free

      CANCELLED - TRUE Service Class taught by Ron Trapper   Class# KZOO04012020 Class Covers: Hydrocarbons R-290 Cabinet Installation Temperature Controls Good Refrigeration Practices Review of New Products You will need to attend this class in order to maintain your company's True Approved Warranty Service Status.

      Find out more »

      October 2021

      x CLASS FULL – KALAMAZOO – Combustion Analysis Technical Training Class

      October 4, 2021 @ 4:00 pm - 7:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      $40

      CLASS FULL - Sauermann Combustion Analysis Technical Training Class - Combustion Analysis, Diagnostics, CO Safety & Air Quality Testing, Residential, Commercial & Industrial - Taught by Tyler Nelson, HVAC Instrumentation Sales Manager Certified NATE Instructor & Master HVACR License Holder WHAT YOU WILL LEARN: • Combustion process: • What is combustion • The 3 T's of combustion • Excess air • CO (Carbon Monoxide • Direct O2 vs CO2 (why measuring O2 is important) • CO (carbon monoxide) • Draft…

      Find out more »

      March 2022

      KALAMAZOO – 3/31/22 – KE2 THERM Training Class

      March 31 @ 9:00 am - 11:00 am
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      Free

      Class presented by Jeff Kavanagh, VP of Sales KE2 Therm Solutions KE2 Therm Training agenda - Learn how to select the right refrigeration controller for your application - Learn how to set up for redundant / multi controller applications - Learn how to overcome service challenges with remote communications Typical length of training session is 1.5 – 2.0 hours KE2 Therm is a U.S.-based developer and manufacturer of "smart" refrigeration controllers and systems. Our leading-edge technology is specified by a whole…

      Find out more »

      April 2022

      KALAMAZOO – 4/12/22 – Rheem Water Heating Class

      April 12 @ 9:00 am - 1:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map

      Class #KZOO04122022 Class will provide an overview of water heaters – tank and tankless.  You will learn types and efficiencies, installation and maintenance basics.  Taught by Rusty Scaggs and Rick Portt $40 includes meal  

      Find out more »

      May 2022

      CLASS FULL – KALAMAZOO -5/3/22 – Mitsubishi Training for Diamond Contractors and Prospects

      May 3 @ 3:00 pm - 5:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map

      CLASS FULL Class #KZO050322 Class will provide  Mitsubishi Electric Installation and Service Basics  Existing Diamond Contractors can gain Scorecard Training points for 2022 from these classes.  Anyone that sells and installs Mitsubishi Electric Equipment will benefit from this class. MyLinkDrive.com Overview New and Experienced Technicians and Installers will learn about the features available on MyLinkDrive.com.  Introduction to MyLinkDrive.com Explain an inverter circuit Wiring, piping, and Branch Box Addressing Multi-zone installations additional refrigerant charge and Diamond System Builder Controls review and…

      Find out more »

      KALAMAZOO – 5/10/22 EPA 608 Refrigerant Certification Review & Exam

      May 10 @ 8:30 am - 12:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      $140.00
      EPA 608 class

      EPA Certification Review and Exam instructed by Young Supply's own Terry Tarantine.  Students purchase part # QT3000 from Young Supply @ $140, which is the cost of the class.  Prior to class day, students will self study from the book but can email the instructor, tjt@youngsupply.com , with questions.  The class will have a 25 question review from each of the EPA-608 sections and, after a question and answer period, the exam will be administered.  Lead time on exam results…

      Find out more »

      September 2022

      KALAMAZOO – 9/21/22- Rheem R96V Install Class

      September 21 @ 8:00 am - 12:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map

      Class #KZO09222022   Rheem R96V Install Class with Young Supply Rheem Technical Specialist Larry Marhofer. Class will cover the install and set up on Rheem R96V furnace. Qualifies for Rheem Pro Partner class credits.   Free class.  

      Find out more »

      October 2022

      10/6/22 – KALAMAZOO – Combustion Analysis Technical Training Class

      October 6 @ 4:00 pm - 7:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      Free

      Sauermann Combustion Analysis Technical Training Class - Combustion Analysis, Diagnostics, CO Safety & Air Quality Testing, Residential, Commercial & Industrial - Taught by Tyler Nelson, HVAC Instrumentation Sales Manager Certified NATE Instructor & Master HVACR License Holder WHAT YOU WILL LEARN: • Combustion process: • What is combustion • The 3 T's of combustion • Excess air • CO (Carbon Monoxide • Direct O2 vs CO2 (why measuring O2 is important) • CO (carbon monoxide) • Draft • Why perform…

      Find out more »

      CANCELED – KALAMAZOO – 10/18/22 – Fieldpiece Refrigerant Leak Detection & Wireless System Troubleshooting

      October 18 @ 9:00 am - 11:00 am
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      Free

      Class# KZO101822 Fieldpiece Training Day with Tammy Ciesla & Trent Davis  TWO CLASSES IN ONE! Class 1: Wireless System Troubleshooting: Easier, Faster, Better Class description: Today’s HVACR professionals are expected to troubleshoot systems as quickly and efficiently as possible. In this session, you will learn how incorporating wireless technologies will make it easier to troubleshoot equipment in a fast and efficient manner. How is this possible? By gathering multiple data points at once, you can evaluate all aspects of system performance…

      Find out more »

      November 2022

      KALAMAZOO -11/2/22 EPA 608 Refrigerant Certification Review & Exam

      November 2 @ 9:00 am - 12:00 pm
      Kalamazoo – YSC Learning Center, 5737 East Cork Street
      Kalamazoo, MI 49048 United States
      + Google Map
      $140.00
      EPA 608 class

      EPA Certification Review and Exam instructed by Young Supply's own Terry Tarantine.  Students must contact their local Young Supply branch and purchase part # QT3000 for $140, which is the cost of the class.  Prior to class day, students will self study from the book but can email the instructor, tjt@youngsupply.com , with questions.  The class will have a 25 question review from each of the EPA-608 sections and, after a question and answer period, the exam will be administered. …

      Find out more »
      + Export Events

      Looking for a class you didn’t find?  Please send us an email and let us know what type of class you’d like to see offered at Young Supply: training@youngsupply.com