FARMINGTON - 9/20/23 - Browning Belt Lunch & Learn
2023-09-20 12:00 - 13:00 (America/Detroit) | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class: Browning Belt Training
Instructor: Jim Arnold – Browning HVAC Specialist
When: Wednesday, September 20, 2023 12PM – 1PM
Where: Young Supply FARMINGTON – 30300 W 8 Mile Rd., Farmington Hills, MI 48336 – 248-477-4900
Class Fee: No cost with lunch included.

Topics Covered in this one hour session:
•Safety • Browning Toolbox technician app • Belt construction • Belt types
• Belt Cross reference • Efficiency gains for end customers • Proper sheave alignment
• Proper belt tensioning • Retrofitting/Updating new latest belt and sheave technology
• They will be providing free reference guides & sheave gages
Doug Sandberg – Energy Advisor, Consumers Energy, will also be on hand to answer rebate incentive questions related to Browning Belts

CANCELLED - SAGINAW - 9/21/23 - Browning Belt Training hosted by Young Supply
2023-09-21 08:30 - 09:30 | SAGINAW – Young Supply, 125 Davenport Ave., Saginaw, MI, 48602, United States
THIS CLASS HAS BEEN COMBINED WITH THE AFTERNOON CLASS IN FLINT. PLEASE JOIN US THERE at 12PM. Thank you.
Class: Browning Belt Training
Instructor: Jim Arnold – Browning HVAC Specialist
When: Thursday, September 21, 2023 8:30AM – 9:30AM
Where: Young Supply SAGINAW – 125 Davenport Ave., Saginaw, MI 48602
Class Fee: No cost

Topics Covered in this one hour session:
•Safety • Browning Toolbox technician app • Belt construction • Belt types
• Belt Cross reference • Efficiency gains for end customers • Proper sheave alignment
• Proper belt tensioning • Retrofitting/Updating new latest belt and sheave technology
• They will be providing free reference guides & sheave gages
Doug Sandberg, Energy Advisor, Consumers Energy, will also be on hand to answer questions about rebate incentives related to Browning Belts.

FLINT - 9/21/23 - Browning Belt Lunch & Learn
2023-09-21 12:00 - 13:00 | FLINT – Young Supply, 529 Kelso St., Flint, MI, 48506, United States
Class: Browning Belt Training
Instructor: Jim Arnold – Browning HVAC Specialist
When: Thursday, September 21, 2023 12PM – 1PM
Where: Young Supply FLINT – 529 Kelso St., Flint, MI 48506
Class Fee: No cost with lunch included.

Topics Covered in this one hour session:
•Safety • Browning Toolbox technician app • Belt construction • Belt types
• Belt Cross reference • Efficiency gains for end customers • Proper sheave alignment
• Proper belt tensioning • Retrofitting/Updating new latest belt and sheave technology
• They will be providing free reference guides & sheave gages

Doug Sandberg – Energy Advisor, Consumers Energy, will also be on hand to answer questions about rebate incentives related to Browning Belts.

KALAMAZOO - 10/4/23 - Rheem Endeavor Overview & Updates Training
2023-10-04 09:00 - 12:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
Rheem Endeavor Overview & Updates Training
Presented by Larry Marhofer or Dave Souva – Young Supply’s Rheem Technical Specialists
In this 3-hour class, taught by one of Young Supply’s Rheem Technical Specialists, Larry Marhofer or Dave Souva, you will become familiar with the new features of Rheem’s Endeavor line of indoor equipment.
In addition to being updated on all of the components and other DOE changes that have taken place, you will learn how to effectively use the Rheem App and the necessary changes for installation, operation, warranty registration, and repair.
No charge for this class. Thank you for choosing Young Supply & Rheem.

TROY - 10/4/23 - CSD-1 Training Class
2023-10-04 09:00 - 15:00 | TROY – YSC Learning Center, 2237 Elliott Dr, Troy, MI, 48083, United States
Presented by Phil Forner. This class will cover: code requirements for CSD-1 testing and certification, forms needed, how to test and record, and code updates. There will be a review of current CSD-1 codes, test procedures and recording of information, how to fill out forms for state mandated CSD-1 testing, and best practices.
TRAINEES SHALL BRING WITH THEM TO CLASS:
● ASME CSD-1 2018
https://www.asme.org/codes-standards/find-codes-standards/csd-1-controls-safety-devices-automatically-fired-boilers
● Article 9 Skilled Trades Regulation Act
http://legislature.mi.gov/doc.aspx?mcl-407-2016-9
● The new Skilled Trades Regulation Rules R 339.5101 to R 339.5412 available at:
https://ars.apps.lara.state.mi.us/AdminCode/DownloadAdminCodeFile?FileName=R%20339.5101%20to%20R%20339.5412.pdf
(The boiler rules are on pages 6-33 of the new Skilled Trades Regulation Rules.)
● Bureau of Construction Codes administrative rules are located at:
https://ars.apps.lara.state.mi.us/AdminCode/DeptBureauAdminCode?Department=Licensing%20and%20Regulatory%20Affairs&Bureau=Bureau%20of%20Construction%20Codes

This Class Will Earn You 2 NATE CEU Hours!
Class fee includes meal

FARMINGTON - 10/11/23 - Rheem Endeavor Overview & Updates Training
2023-10-11 08:00 - 11:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States

FARMINGTON - 10/18/23 - Combustion Analysis Technical Training Class
2023-10-18 15:00 - 18:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Sauermann Combustion Analysis Technical Training Class – Combustion Analysis, Diagnostics, CO Safety & Air Quality Testing, Residential, Commercial & Industrial
IN THIS HANDS ON CLASS YOU WILL LEARN:
• Combustion process:
• What is combustion
• The 3 T’s of combustion
• Excess air
• CO (Carbon Monoxide
• Direct O2 vs CO2 (why measuring O2 is important)
• CO (carbon monoxide)
• Draft

• Why perform a combustion test & why to use an analyzer
• Why do we need to measure
• How contractors can make money ($$) with an analyzer
• Atmospheric vs. High Efficiency condensing boilers & furnaces
• Using a combustion analyzer to diagnose, solve, & prevent equipment issues
• Combustion troubleshooting

$25 includes class and meal
Instructed by Chris Scherer – ETS Group

FARMINGTON - TWO DAY 10/24/23 & 10/25/23 Mitsubishi M & P Service and Install Class
2023-10-24 08:30 - 2023-10-25 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – October 24 & 25, 2023 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

DOWNTOWN TOLEDO - 10/25/23 - Rheem Endeavor Overview & Updates Training
2023-10-25 09:00 - 12:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States

FARMINGTON - 11/8/23 - Rheem Endeavor Overview & Updates Training
2023-11-08 08:00 - 11:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States

SOUTH GRAND RAPIDS - 11/9/23 - Rheem Endeavor Overview & Updates Training
2023-11-09 09:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States

KALAMAZOO - 11/9/23 - Mitsubishi M&P 4 Hour Field Service Class
2023-11-09 15:00 - 19:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
The Mitsubishi M&P 4 Hour Field Service Class provides participants with an understanding of the fundamentals of Mitsubishi Mr. Slim systems. During this 4-hour seminar you will be introduced to the concepts and theories of operation – including an overview of the unique technologies employed – system design, installation, and the fundamentals of troubleshooting M-series and P-series systems.
Taught by Brent Cox.
Class is limited to 25 students.

FARMINGTON - 12/11/23 - EPA 608 Refrigerant Certification Review & Exam
2023-12-11 08:30 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
EPA Certification Review and Exam instructed by Young Supply’s own Terry Tarantine.
Students must contact their local Young Supply branch prior to the class and purchase part # QT3000 for $148, which is the cost of the class. Prior to class day, students will self study from the book but can email the instructor, tjt@youngsupply.com , with questions.
The class will have a 25 question review from each of the EPA-608 sections and, after a question and answer period, the exam will be administered. Lead time on exam results is typically 2-3 weeks.

KALAMAZOO - 12/13/23 - EPA 608 Refrigerant Certification Review & Exam
2023-12-13 08:30 - 12:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States

DOWNTOWN TOLEDO - 1/11/24 - Cannabis Opportunities in HVAC Class & Discussion
2024-01-10 16:00 - 19:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
Join us for an informative discussion on the new cannabis-based opportunities in the Ohio HVAC industry. This session will include a presentation on Quest Dehumidification technologies by Jeff Morey, IAQ solutions by Terry Tarantine, VRF system solutions by Steve Niezur/Dennis Kurzawa of Young Supply’s CES division, and Billy Metroff presenting on Rheem systems.
Limited spots available – register today.
No cost for this class

FARMINGTON - TWO DAY 1/16/24 & 1/17/24 Mitsubishi M & P Service and Install Class
2024-01-16 08:30 - 2024-01-17 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – January 16 & January 17, 2024 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

DOWNTOWN TOLEDO - 1/16/24 - Electricity for HVAC
2024-01-16 09:00 - 12:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
Tuesday, January 16, 2024
9AM – 12PM Instructed by Terry Tarantine and Larry Marhofer – Basics of electricity for HVAC Technicians / Sequence of operation / Basic Diagram reading / Types of motors used in HVAC / Troubleshooting
Class will cover basic electrical operation for heating & cooling systems, controls and flow sequence for equipment operation, how to read and follow an electrical diagram and troubleshooting.

BIRCH RUN - 5/9/24 - Mitsubishi M&P 4 Hour Field Service Class
2024-05-09 08:00 - 12:00 | BIRCH RUN – Comfort Inn, 11911 Dixie Hwy, Birch Run, MI, 48415, United States
The Mitsubishi M&P 4 Hour Field Service Class provides participants with an understanding of the fundamentals of Mitsubishi Mr. Slim systems. During this 4-hour seminar you will be introduced to the concepts and theories of operation – including an overview of the unique technologies employed – system design, installation, and the fundamentals of troubleshooting M-series and P-series systems.
Class Instructor: Brent Cox.
$35 fee billed on day of class. Limited to 25 students.

FARMINGTON - TWO DAY 5/14/24 & 5/15/24 Mitsubishi M & P Service and Install Class
2024-05-14 08:30 - 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – Tuesday, May 14 & Wednesday, May 15, 2024 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

TROY - 5/28/24 - EPA 608 Refrigerant Certification Review & Exam
2024-05-28 08:30 - 12:00 | TROY – Young Supply, 2237 Elliott Drive, Troy, MI, 48083, United States
EPA Certification Review and Exam instructed by Young Supply’s own Terry Tarantine.
Students must contact their local Young Supply branch prior to the class and purchase part # QT3000 for $151, which is the cost of the class. Prior to class day, students will self study from the book but can email the instructor, tjt@youngsupply.com , with questions.
The class will have a 25 question review from each of the EPA-608 sections and, after a question and answer period, the exam will be administered. Lead time on exam results is typically 2-3 weeks.

TROY - 6/25/24 - EPA 608 Refrigerant Certification Review & Exam
2024-06-25 08:30 - 12:00 | TROY – Young Supply, 2237 Elliott Drive, Troy, MI, 48083, United States

FARMINGTON - TWO DAY 9/10/24 & 9/11/24 Mitsubishi M & P Service and Install Class
2024-09-10 08:30 - 2024-09-11 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – Tuesday, September 10 & Wednesday, September 11, 2024 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

SOUTH GRAND RAPIDS - 9/10/24 - Rheem's Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
2024-09-10 09:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY
Rheem’s Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
Class Instructors – Young Supply’s own Dave Fletcher & Dave Souva
The Rheem Universal Side Discharge Heat Pumps course is designed to educate the technician on heat pump systems that utilize inverters and inverter driven compressors. Taking a systems approach, the training covers electronic expansion valves, pressure transducers, and inverter operation. The training delves into the sequence of operations, system installation, components explanations, service procedures, system diagnostics and Universal heat pump applications.
A2L Refrigerant Detection System (RDS) System
Course Description
This class will discuss the installation, application and sequence of operation of RDS as required when installing units using A2L refrigerants.
Recommended Prerequisites
Single Stage Heat Pump Systems
EcoNet Systems
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY

KALAMAZOO - 9/11/24 - Rheem's Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
2024-09-11 09:00 - 12:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY
Rheem’s Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
Class Instructors – Young Supply’s own Dave Fletcher & Dave Souva
The Rheem Universal Side Discharge Heat Pumps course is designed to educate the technician on heat pump systems that utilize inverters and inverter driven compressors. Taking a systems approach, the training covers electronic expansion valves, pressure transducers, and inverter operation. The training delves into the sequence of operations, system installation, components explanations, service procedures, system diagnostics and Universal heat pump applications
A2L Refrigerant Detection System (RDS) System
Course Description
This class will discuss the installation, application and sequence of operation of RDS as required when installing units using A2L refrigerants.

Recommended Prerequisites
Single Stage Heat Pump Systems
EcoNet Systems
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY

FARMINGTON - 9/12/24 - Rheem's Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
2024-09-12 09:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States

FARMINGTON - 9/18/24 Mitsubishi Zoned Comfort Solutions and Diamond System Builder
2024-09-18 09:00 - 13:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Zoned Comfort Solutions and DSB – instructed by Dianna Cacko
Please note – This class is limited to Mitsubishi Diamond Contractors.
Increase your knowledge of Mitsubishi’s M and P-series product lines to effectively select and recommend the best solutions for single and multi-zone applications. This course will include an overview of Mitsubishi’s selection tool Diamond System Builder (DSB) including opportunities to practice building and selecting systems using DSB results. This course is a requirement of the Diamond Contractor Program and is ideal for salespeople and owners. It is recommended you bring a laptop with DSB already downloaded to class.
DSB software can be accessed at https://tinyurl.com/MylinkdriveDSB
Meal included.

CANCELED - FARMINGTON - 9/23/24 - Armacell AQIP 201 Hands-On Session
2024-09-23 09:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Canceled – Armacell AQIP 201 Hands-On Session
Class Instructor – Anthony from Armacell
Topics to be covered in this informative hands-on class:
• Overview of the benefits of using Armacell Insulation products
• Safety tips prior to and during installation
• Recommended tools when installing ArmaFlex insulation
• How to properly cut, glue, seam and seal
• How to use Armacell adhesives, tapes, coatings and pipe
supports
• Proper slitting techniques for small and large diameter tube
insulation
• Hands on fabrication of large diameter fitting covers with
Armacell Sheet Insulation
• Hands on fabrication of 45 degree elbow, 90 degree elbow,
Tee Fittings, Lateral Strainer and a P-Trap fitting using the
Armacell cutting template as a miter box.
• Review method of multi-layering for added insulation thickness
using tube or sheet insulation.

CANCELED - SOUTH GRAND RAPIDS - 9/24/24 - Armacell AQIP 201 Hands-On Session
2024-09-24 09:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States

SOUTH GRAND RAPIDS - 9/25/24 - EPA 608 Refrigerant Certification Review & Exam
2024-09-25 09:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States
EPA Certification Review and Exam instructed by Young Supply. In advance of the class, students must purchase part # QT3000 from Young Supply @ $151, which is the cost of the class. Prior to class day, students will self study from the book but can email, tjt@youngsupply.com , with questions. The class will have a 25 question review from each of the EPA-608 sections and, after a question and answer period, the exam will be administered. Lead time on exam results is typically 2-3 weeks.
Class size strictly limited to 16 students.

CANCELED - DOWNTOWN TOLEDO - 9/25/24 - Armacell AQIP 201 Hands-On Session
2024-09-25 09:00 - 12:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
