Young Supply Company

FARMINGTON - 10/5/22 - Boiler Basics with Rick Johnson - Burnham
2022-10-05 16:00 - 19:00 (America/Detroit) | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Boiler Basics with Rick Johnson – Burnham

High efficiency boilers – set up, sizing, piping and operation
Utility rebate programs for Hi-E boilers and ECM pumps
Near boiler piping and accessories – difference between high and low effic air separators, how to size and expansion tank etc.
Basic pump sizing – what happens if it’s too big or small – Why we choose a 20* TD or a 30* TD
Basic troubleshooting

No charge for this class. Thank you for choosing Young Supply & Burnham

10/6/22 - KALAMAZOO - Combustion Analysis Technical Training Class
2022-10-06 16:00 - 19:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
Sauermann Combustion Analysis Technical Training Class – Combustion Analysis, Diagnostics, CO Safety & Air Quality Testing, Residential, Commercial & Industrial – Taught by Tyler Nelson, HVAC Instrumentation Sales Manager Certified NATE Instructor & Master HVACR License Holder
WHAT YOU WILL LEARN:
• Combustion process:
• What is combustion
• The 3 T’s of combustion
• Excess air
• CO (Carbon Monoxide
• Direct O2 vs CO2 (why measuring O2 is important)
• CO (carbon monoxide)
• Draft

• Why perform a combustion test & why to use an analyzer
• Why do we need to measure
• How contractors can make money ($$) with an analyzer
• Atmospheric vs. High Efficiency condensing boilers & furnaces
• Using a combustion analyzer to diagnose, solve, & prevent equipment issues
• Combustion troubleshooting

This Class Qualifies for 2 NATE CEU Hours!

DOWNTOWN TOLEDO - 10/6/22 - Boiler Basics with Rick Johnson - Burnham
2022-10-06 16:00 - 19:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
CLASS CANCELLED
Boiler Basics with Rick Johnson – Burnham

High efficiency boilers – set up, sizing, piping and operation
Utility rebate programs for Hi-E boilers and ECM pumps
Near boiler piping and accessories – difference between high and low effic air separators, how to size and expansion tank etc.
Basic pump sizing – what happens if it’s too big or small – Why we choose a 20* TD or a 30* TD
Basic troubleshooting

No charge for this class. Thank you for choosing Young Supply & Burnham

CLASS CANCELLED

FARMINGTON - 10/7/22 - Quest Dehumidifier Lunch & Learn
2022-10-07 11:00 - 13:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Quest Dehumidifier Lunch & Learn
Join us Friday, October 7, to learn more about Quest dehumidifiers. In this training, Quest’s representatives Jeff Morey and Scott Campana will do a deep dive into Quest product offerings and benefits.
Topics will include:

Product overview
Efficiency and Return on Investment
Applications
Installation best practices
What you need to know to size and select the proper dehumidifier
Q& A session

FARMINGTON - TWO DAY 10/12/22 & 10/13/22 Mitsubishi M & P Installation Essentials & Service Class
2022-10-12 08:30 - 2022-10-13 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class #FAR1012_1013
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Two Day Class Instructed Brent Cox
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

CANCELED - KALAMAZOO - 10/18/22 - Fieldpiece Refrigerant Leak Detection & Wireless System Troubleshooting
2022-10-18 09:00 - 11:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
Class# KZO101822
Fieldpiece Training Day with Tammy Ciesla & Trent Davis
TWO CLASSES IN ONE!

Class 1: Wireless System Troubleshooting: Easier, Faster, Better
Class description: Today’s HVACR professionals are expected to troubleshoot systems as quickly and efficiently as possible. In this session, you will learn how incorporating wireless technologies will make it easier to troubleshoot equipment in a fast and efficient manner. How is this possible? By gathering multiple data points at once, you can evaluate all aspects of system performance in real-time, allowing you to achieve peak system performance in the shortest amount of time.
Class 2: Refrigerant Leak Detection: Pinpoint Leaks Faster
Class description: Finding refrigerant leaks can betedious and frustrating; but it is an essential aspect of many service and installation jobs. In this session, you will learn the theory and hands-on elements of refrigerant leak detection and how to pinpoint leaks easier, faster, and better.

This Session Qualifies for 2 NATE CEU Hours!

FARMINGTON - 10/19/22 - Fieldpiece Refrigerant Leak Detection & Wireless System Troubleshooting
2022-10-19 16:00 - 18:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class# FAR101922
Fieldpiece Training Day with Tammy Ciesla & Trent Davis
TWO CLASSES IN ONE!

Class 1: Wireless System Troubleshooting: Easier, Faster, Better
Class description: Today’s HVACR professionals are expected to troubleshoot systems as quickly and efficiently as possible. In this session, you will learn how incorporating wireless technologies will make it easier to troubleshoot equipment in a fast and efficient manner. How is this possible? By gathering multiple data points at once, you can evaluate all aspects of system performance in real-time, allowing you to achieve peak system performance in the shortest amount of time.
Class 2: Refrigerant Leak Detection: Pinpoint Leaks Faster
Class description: Finding refrigerant leaks can betedious and frustrating; but it is an essential aspect of many service and installation jobs. In this session, you will learn the theory and hands-on elements of refrigerant leak detection and how to pinpoint leaks easier, faster, and better.

This Session Qualifies for 2 NATE CEU Hours!

FARMINGTON - 10/20/22 - Mitsubishi M-Series & P-Series Application/ZCS Training
2022-10-20 08:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
FARMINGTON – 10/20/22 – Mitsubishi M-Series & P-Series Application/ZCS Training instructed by Ryan Spangler

This course will increase product knowledge of the M-Series and P-Series product lines and improve the participant’s ability to
select the most appropriate applications for these products. The Zoned Comfort Solutions Training is designed to
provide Diamond Contractors with the skills and knowledge to effectively recommend Mitsubishi Electric solutions to
potential customers and the knowledge required to capture and retain customers and articulating solutions.
Module 1: Hot Spot/Cold Spot Solutions Module 2: Cooling & Heating Renovated Spaces.
Objectives

-Suggest the best equipment for various applications such as single-zone versus multi-zone, standard heat pumps versus Hyper-Heating, ducted indoor units versus wall-mount or other styles.
-Based on a specific application, identify the proper components and accessories to correctly install a complete system.
-Locate installation requirements such as maximum piping lengths, operating ranges, and power requirements.
-Recognize the M-Series and P-Series product lines as a “first approach” rather than a “last resort” when it comes to replacement of existing systems and/or new construction.

Prerequisite: Everyone enrolling in Zoned Comfort Solutions Training (Modules 1 & 2) should complete online eLearning Residential Product Overview module: https://meushvac.force.com/Contractor/s/
Free class

DOWNTOWN TOLEDO - 10/20/22 - Fieldpiece Refrigerant Leak Detection & Wireless System Troubleshooting
2022-10-20 16:00 - 18:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
Class# DTOL102022
Fieldpiece Training Day with Tammy Ciesla & Trent Davis
TWO CLASSES IN ONE!

Class 1: Wireless System Troubleshooting: Easier, Faster, Better
Class description: Today’s HVACR professionals are expected to troubleshoot systems as quickly and efficiently as possible. In this session, you will learn how incorporating wireless technologies will make it easier to troubleshoot equipment in a fast and efficient manner. How is this possible? By gathering multiple data points at once, you can evaluate all aspects of system performance in real-time, allowing you to achieve peak system performance in the shortest amount of time.
Class 2: Refrigerant Leak Detection: Pinpoint Leaks Faster
Class description: Finding refrigerant leaks can betedious and frustrating; but it is an essential aspect of many service and installation jobs. In this session, you will learn the theory and hands-on elements of refrigerant leak detection and how to pinpoint leaks easier, faster, and better.

This Session Qualifies for 2 NATE CEU Hours!

FARMINGTON - TWO DAY 11/8/22 & 11/9/22 Mitsubishi M & P Installation Essentials & Service Class
2022-11-08 08:30 - 2022-11-09 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class #FAR1108_1109
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Two Day Class Instructed Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

FARMINGTON - 11/16/22- Rheem R96V Install Class
2022-11-16 08:00 - 11:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Rheem R96V Install Class with Young Supply Rheem Technical Specialist Larry Marhofer.
Class will cover the install and set up on Rheem R96V furnace.
Qualifies for Rheem Pro Partner class credits.
Limited to 16 students.
Free class.

FARMINGTON - 11/22/22 - Comfort Consultant Sales Training
2022-11-22 09:00 - 16:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Comfort Consultant Sales with Terry Tarantine

Agenda
– Introductions and goals – What do you want to get out of today? What areas do you wish to concentrate on? – strength / weakness
– Review of systems – Rheem & Mini Splits – relevance to customer needs and wants. Features vs. Benefits
– Creating the Customer Comfort Questionnaire
– Setting up the call – what info do you need? Prepping / DSR
– Financing / Financing / Financing – Synchrony training on Rheem Academy website. Practice offering in front of room.
– Lunch
– DSR
– Sales Videos / Closing Techniques
– Presentations
PLEASE NOTE: Class is only open to Rheem Dealers.

FARMINGTON - TWO DAY 12/6 & 12/7 Mitsubishi M & P Installation Essentials & Service Class
2022-12-06 08:30 - 2022-12-07 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class #FAR1206_1207
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Two Day Class Instructed Brent Cox
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

FARMINGTON - 12/7/22- Rheem R96V Install Class
2022-12-07 08:00 - 11:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States

CLASS FULL - FARMINGTON - 1/10/23 - "M1" Indoor Equipment Training
2023-01-10 08:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class# FAR01102023
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

THIS CLASS IS FULL – PLEASE CHECK OUR SCHEDULE FOR AVAILABILITY ON OTHER DATES

KALAMAZOO - 1/11/23 - "M1" Indoor Equipment Training
2023-01-11 08:00 - 12:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
Class# KZO01112023
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

DOWNTOWN TOLEDO - 1/12/23 - "M1" Indoor Equipment Training
2023-01-12 08:00 - 12:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
Class# DTOL01122023
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

CLASS FULL - FARMINGTON - 1/19/23 - "M1" Indoor Equipment Training
2023-01-19 08:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
THIS CLASS IS NOW FULL – PLEASE CHECK OUR SCHEDULE FOR ANOTHER UPCOMING CLASS
Class# FAR01102023
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

CLASS FULL - FARMINGTON - 1/25/23 - "M1" Indoor Equipment Training
2023-01-25 08:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
CLASS FULL – PLEASE CHECK BACK AS WE WILL BE OFFERING THIS CLASS AGAIN IN THE FUTURE.
Class# FAR01252023
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

FARMINGTON - 2/1/23 - "M1" Indoor Equipment Training
2023-02-01 08:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class# FAR020123
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

FARMINGTON - TWO DAY 2/7/23 & 2/8/23 Mitsubishi M & P Installation Essentials & Service Class
2023-02-07 08:30 - 2023-02-08 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class #FAR0207_0208
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Two Day Class Instructed Brent Cox
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

CANCELLED - TROY - 2/7/23 DesignStar Class
2023-02-07 16:00 - 19:00 | TROY – YSC Learning Center, 2237 Elliott Dr, Troy, MI, 48083, United States
This class has been cancelled for this date and will be rescheduled at a later time. We apologize for any inconvenience.
Presented by Terry Tarantine.
Open to all Rheem Dealers.
This class will teach you how to quickly and easily do a Manual J, S and offer Good – Better – Best options and enhance your sales in less time than ever before.

SOUTH Grand Rapids - 2/15/23 - "M1" Indoor Equipment Training
2023-02-15 08:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States
Class# SGR021523
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

NO COST: At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

CLASS FULL - FARMINGTON - 2/22/23 - "M1" Indoor Equipment Training
2023-02-22 08:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class# FAR022223
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

THIS CLASS IS NOW FULL. PLEASE CHECK SCHEDULE FOR FUTURE CLASSES.

DOWNTOWN TOLEDO - 2/23/23 - Mitsubishi M&P Service Class
2023-02-23 13:00 - 17:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
Class# DTOL022323
Mitsubishi M & P Service Class

Presented by Brent Cox & Larry Armes
Seminar Description: The Mitsubishi Field Service Seminar provides participants with an understanding of the fundamentals of Mitsubishi Ductless systems. During this 4-hour seminar you will be introduced to the concepts and theories of operation – including an overview of the unique technologies employed – system design, installation and the fundamentals of troubleshooting M-series and P-series systems.

Participants will be awarded 4 NATE continuing education credits and 0.4 IACET CEUs.

Target Audience: This course is recommended for personnel responsible for installing, servicing and conducting maintenance on Mr. Slim M- and P-Series Systems.

What you will learn:

Identify and discuss current product models
Describe the system components and characteristics
Interpret the system component specifications
Discuss system functionality and capabilities
Discuss the various technologies employed in Mitsubishi systems
Identify and define variables in system design
Identify and discuss the system installation procedures and requirements
Discuss the internal electrical and refrigerant circuitry of the system
Discuss Mitsubishi system troubleshooting and fault isolation procedures

OCILB Approved for 4 hours

Class Fee is only $35, which covers the cost of the course book that will be handed out during the class.

CLASS FULL - SOUTH Grand Rapids - 3/9/23 - "M1" Indoor Equipment Training
2023-03-09 08:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States
THIS CLASS IS NOW FULL – PLEASE CHECK BACK FOR FUTURE ‘M1″ CLASSES
Class# SGR030923
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

NO COST: At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.
THIS CLASS IS NOW FULL – PLEASE CHECK BACK FOR FUTURE ‘M1″ CLASSES

FARMINGTON - TWO DAY 3/14/23 & 3/15/23 Mitsubishi M & P Installation Essentials & Service Class
2023-03-14 08:30 - 2023-03-15 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class #FAR0314_0315
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Two Day Class Instructed Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

TRAVERSE CITY - 3/14/23 - "M1" Indoor Equipment Training
2023-03-14 11:30 - 14:30 | MI
Class# TVC031423
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

CLASS FULL - TROY - 3/21/23 - EPA 608 Refrigerant Certification Review & Exam
2023-03-21 09:00 - 12:00 | TROY – Young Supply, 2237 Elliott Drive, Troy, MI, 48083, United States
CLASS FULL – EPA Certification Review and Exam instructed by Young Supply’s own Terry Tarantine. Students must contact their local Young Supply branch and purchase part # QT3000 for $140, which is the cost of the class. Prior to class day, students will self study from the book but can email the instructor, tjt@youngsupply.com , with questions. The class will have a 25 question review from each of the EPA-608 sections and, after a question and answer period, the exam will be administered. Lead time on exam results is typically 2-3 weeks.

CLASS FULL - SAGINAW - 3/22/23 - "M1" Indoor Equipment Training
2023-03-22 09:00 - 12:00 | SAGINAW – Young Supply, 125 Davenport Ave., Saginaw, MI, 48602, United States
THIS CLASS IS NOW FULL – PLEASE EMAIL training@youngsupply.com for standby list. Thank you.
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements Take Effect Jan. 1, 2023, Rheem will be ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this four hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

NO COST: At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.
THIS CLASS IS NOW FULL – PLEASE EMAIL training@youngsupply.com for standby list. Thank you.
