DOWNTOWN TOLEDO - 1/16/24 - Electricity for HVAC
2024-01-16 09:00 - 12:00 (America/Detroit) | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
Tuesday, January 16, 2024
9AM – 12PM Instructed by Terry Tarantine and Larry Marhofer – Basics of electricity for HVAC Technicians / Sequence of operation / Basic Diagram reading / Types of motors used in HVAC / Troubleshooting
Class will cover basic electrical operation for heating & cooling systems, controls and flow sequence for equipment operation, how to read and follow an electrical diagram and troubleshooting.

BIRCH RUN - 5/9/24 - Mitsubishi M&P 4 Hour Field Service Class
2024-05-09 08:00 - 12:00 | BIRCH RUN – Comfort Inn, 11911 Dixie Hwy, Birch Run, MI, 48415, United States
The Mitsubishi M&P 4 Hour Field Service Class provides participants with an understanding of the fundamentals of Mitsubishi Mr. Slim systems. During this 4-hour seminar you will be introduced to the concepts and theories of operation – including an overview of the unique technologies employed – system design, installation, and the fundamentals of troubleshooting M-series and P-series systems.
Class Instructor: Brent Cox.
$35 fee billed on day of class. Limited to 25 students.

FARMINGTON - TWO DAY 5/14/24 & 5/15/24 Mitsubishi M & P Service and Install Class
2024-05-14 08:30 - 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – Tuesday, May 14 & Wednesday, May 15, 2024 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

TROY - 5/28/24 - EPA 608 Refrigerant Certification Review & Exam
2024-05-28 08:30 - 12:00 | TROY – Young Supply, 2237 Elliott Drive, Troy, MI, 48083, United States
EPA Certification Review and Exam instructed by Young Supply’s own Terry Tarantine.
Students must contact their local Young Supply branch prior to the class and purchase part # QT3000 for $151, which is the cost of the class. Prior to class day, students will self study from the book but can email the instructor, tjt@youngsupply.com , with questions.
The class will have a 25 question review from each of the EPA-608 sections and, after a question and answer period, the exam will be administered. Lead time on exam results is typically 2-3 weeks.

TROY - 6/25/24 - EPA 608 Refrigerant Certification Review & Exam
2024-06-25 08:30 - 12:00 | TROY – Young Supply, 2237 Elliott Drive, Troy, MI, 48083, United States

FARMINGTON - TWO DAY 9/10/24 & 9/11/24 Mitsubishi M & P Service and Install Class
2024-09-10 08:30 - 2024-09-11 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – Tuesday, September 10 & Wednesday, September 11, 2024 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

SOUTH GRAND RAPIDS - 9/10/24 - Rheem's Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
2024-09-10 09:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY
Rheem’s Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
Class Instructors – Young Supply’s own Dave Fletcher & Dave Souva
The Rheem Universal Side Discharge Heat Pumps course is designed to educate the technician on heat pump systems that utilize inverters and inverter driven compressors. Taking a systems approach, the training covers electronic expansion valves, pressure transducers, and inverter operation. The training delves into the sequence of operations, system installation, components explanations, service procedures, system diagnostics and Universal heat pump applications.
A2L Refrigerant Detection System (RDS) System
Course Description
This class will discuss the installation, application and sequence of operation of RDS as required when installing units using A2L refrigerants.
Recommended Prerequisites
Single Stage Heat Pump Systems
EcoNet Systems
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY

KALAMAZOO - 9/11/24 - Rheem's Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
2024-09-11 09:00 - 12:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY
Rheem’s Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
Class Instructors – Young Supply’s own Dave Fletcher & Dave Souva
The Rheem Universal Side Discharge Heat Pumps course is designed to educate the technician on heat pump systems that utilize inverters and inverter driven compressors. Taking a systems approach, the training covers electronic expansion valves, pressure transducers, and inverter operation. The training delves into the sequence of operations, system installation, components explanations, service procedures, system diagnostics and Universal heat pump applications
A2L Refrigerant Detection System (RDS) System
Course Description
This class will discuss the installation, application and sequence of operation of RDS as required when installing units using A2L refrigerants.

Recommended Prerequisites
Single Stage Heat Pump Systems
EcoNet Systems
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY

FARMINGTON - 9/12/24 - Rheem's Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
2024-09-12 09:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States

FARMINGTON - 9/18/24 Mitsubishi Zoned Comfort Solutions and Diamond System Builder
2024-09-18 09:00 - 13:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Zoned Comfort Solutions and DSB – instructed by Dianna Cacko
Please note – This class is limited to Mitsubishi Diamond Contractors.
Increase your knowledge of Mitsubishi’s M and P-series product lines to effectively select and recommend the best solutions for single and multi-zone applications. This course will include an overview of Mitsubishi’s selection tool Diamond System Builder (DSB) including opportunities to practice building and selecting systems using DSB results. This course is a requirement of the Diamond Contractor Program and is ideal for salespeople and owners. It is recommended you bring a laptop with DSB already downloaded to class.
DSB software can be accessed at https://tinyurl.com/MylinkdriveDSB
Meal included.

CANCELED - FARMINGTON - 9/23/24 - Armacell AQIP 201 Hands-On Session
2024-09-23 09:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Canceled – Armacell AQIP 201 Hands-On Session
Class Instructor – Anthony from Armacell
Topics to be covered in this informative hands-on class:
• Overview of the benefits of using Armacell Insulation products
• Safety tips prior to and during installation
• Recommended tools when installing ArmaFlex insulation
• How to properly cut, glue, seam and seal
• How to use Armacell adhesives, tapes, coatings and pipe
supports
• Proper slitting techniques for small and large diameter tube
insulation
• Hands on fabrication of large diameter fitting covers with
Armacell Sheet Insulation
• Hands on fabrication of 45 degree elbow, 90 degree elbow,
Tee Fittings, Lateral Strainer and a P-Trap fitting using the
Armacell cutting template as a miter box.
• Review method of multi-layering for added insulation thickness
using tube or sheet insulation.

CANCELED - SOUTH GRAND RAPIDS - 9/24/24 - Armacell AQIP 201 Hands-On Session
2024-09-24 09:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States

SOUTH GRAND RAPIDS - 9/25/24 - EPA 608 Refrigerant Certification Review & Exam
2024-09-25 09:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States
EPA Certification Review and Exam instructed by Young Supply. In advance of the class, students must purchase part # QT3000 from Young Supply @ $151, which is the cost of the class. Prior to class day, students will self study from the book but can email, tjt@youngsupply.com , with questions. The class will have a 25 question review from each of the EPA-608 sections and, after a question and answer period, the exam will be administered. Lead time on exam results is typically 2-3 weeks.
Class size strictly limited to 16 students.

CANCELED - DOWNTOWN TOLEDO - 9/25/24 - Armacell AQIP 201 Hands-On Session
2024-09-25 09:00 - 12:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States

KALAMAZOO - 9/26/24 - intelliGen Training with Dennis Krumm
2024-09-26 08:00 - 10:30 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
intelliGen Training
Class Instructor – Dennis Krumm from Heatcraft
In this highly informative class, the one and only Dennis Krumm, from Heatcraft,
will be teaching the ins and outs of the intelliGen refrigeration controllers that are known to deliver reliable operation and system performance.
As time allows, Dennis will also touch on the topic of A2L.

TROY - 10/3/24 - EPA 608 Refrigerant Certification Review & Exam
2024-10-03 08:30 - 12:00 | TROY – Young Supply, 2237 Elliott Drive, Troy, MI, 48083, United States

FARMINGTON - 10/8/24 - Rheem Commercial Gas/Electric Equipment and Accessories
2024-10-08 09:00 - 13:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Rheem Commercial Gas/Electric Equipment & Accessories
Class Instructors – Young Supply’s own Larry Marhofer – Dave Souva – Dave Fletcher
This Commercial training course is designed to train commercial
technicians on proper installation, diagnostics, and service procedures. The course will
cover installation procedures for base systems as well as variable frequency drives and
economizers. Advanced topics covered include adjusting airflow, components testing,
flame current testing, and more system diagnostics controls.
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY

SOUTH GRAND RAPIDS - 10/9/24 - Rheem Commercial Gas/Electric Equipment and Accessories
2024-10-09 09:00 - 13:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States

KALAMAZOO - 10/10/24 - Rheem Commercial Gas/Electric Equipment and Accessories
2024-10-10 09:00 - 13:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States

FARMINGTON - 10/22/24 Macurco Commercial Gas Detection & Calibration Certification Training
2024-10-22 08:30 - 10:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills involving:

Troubleshooting
Detector calibration
Wiring diagrams
How to manuals, troubleshooting guide, etc.

Tuesday, October 22, 2024 8:30AM – 10:30AM
Instructed by Macurco instructors

CLASS FULL - TROY - 10/23/24 - Rheem's Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
2024-10-23 09:00 - 12:00 | TROY – YSC Learning Center, 2237 Elliott Dr, Troy, MI, 48083, United States
**CLASS FULL**
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY
Rheem’s Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
Class Instructors – Young Supply’s own Dave Fletcher & Dave Souva
The Rheem Universal Side Discharge Heat Pumps course is designed to educate the technician on heat pump systems that utilize inverters and inverter driven compressors. Taking a systems approach, the training covers electronic expansion valves, pressure transducers, and inverter operation. The training delves into the sequence of operations, system installation, components explanations, service procedures, system diagnostics and Universal heat pump applications
A2L Refrigerant Detection System (RDS) System
Course Description
This class will discuss the installation, application and sequence of operation of RDS as required when installing units using A2L refrigerants.

Recommended Prerequisites
Single Stage Heat Pump Systems
EcoNet Systems
PLEASE NOTE – THIS CLASS IS OPEN TO YOUNG SUPPLY DEALERS ONLY
**CLASS FULL**

DOWNTOWN TOLEDO - 10/24/24 - Rheem's Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
2024-10-24 09:00 - 12:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States

CANCELED - SOUTH GRAND RAPIDS - 10/25/24 - Rheem's Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
2024-10-25 09:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States
THIS CLASS HAS BEEN CANCELED – SORRY FOR ANY INCONVENIENCE
Rheem’s Universal Side Discharge Heat Pump and A2L Refrigerant Detection System
Class Instructors – Young Supply’s own Dave Fletcher & Dave Souva
The Rheem Universal Side Discharge Heat Pumps course is designed to educate the technician on heat pump systems that utilize inverters and inverter driven compressors. Taking a systems approach, the training covers electronic expansion valves, pressure transducers, and inverter operation. The training delves into the sequence of operations, system installation, components explanations, service procedures, system diagnostics and Universal heat pump applications.
A2L Refrigerant Detection System (RDS) System
Course Description
This class will discuss the installation, application and sequence of operation of RDS as required when installing units using A2L refrigerants.
Recommended Prerequisites
Single Stage Heat Pump Systems
EcoNet Systems

FARMINGTON - TWO DAY 10/29/24 & 10/30/24 Mitsubishi M & P Service and Install Class
2024-10-29 08:30 - 2024-10-30 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – Tuesday, October 29 & Wednesday, October 30, 2024 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

TRAVERSE CITY - 11/6/24 Mitsubishi Zoned Comfort Solutions and Diamond System Builder
2024-11-06 08:00 - 12:00 | MI
Zoned Comfort Solutions and DSB – instructed by Dianna Cacko
Please note – This class is limited to Mitsubishi Diamond Contractors.
Increase your knowledge of Mitsubishi’s M and P-series product lines to effectively select and recommend the best solutions for single and multi-zone applications. This course will include an overview of Mitsubishi’s selection tool Diamond System Builder (DSB) including opportunities to practice building and selecting systems using DSB results. This course is a requirement of the Diamond Contractor Program and is ideal for salespeople and owners. It is recommended you bring a laptop with DSB already downloaded to class.
DSB software can be accessed HERE

FARMINGTON - TWO DAY 12/3/24 & 12/4/24 Mitsubishi M & P Service and Install Class
2024-12-03 08:30 - 2024-12-04 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – Tuesday, December 3 & Wednesday, December 4, 2024 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

FARMINGTON - 1/14/25 Hi Efficiency Gas Furnaces Training
2025-01-14 09:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed for Hi Efficiency Gas Furnaces.
The 90 Plus Gas Furnace training program explores the many aspects of installing, servicing, and diagnosing single and two-stage 90 plus gas furnaces as well as Modulating gas furnaces. Installing procedures discussed include converting the furnaces to meet various applications, Cat. IV venting, LP conversion, twinning, set up, and commissioning. Service and maintenance procedures include, sequence of operation (single. two-stage & modulating), key components, proper component diagnostics, and component replacement guidelines.
Date: Tuesday, January 14, 2025 at 9:00AM – 12:00PM
Instructed by Larry Marhofer & Dave Fletcher

DOWNTOWN TOLEDO - 1/15/25 Hi Efficiency Gas Furnaces Training
2025-01-15 09:00 - 12:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
Acquire the in-depth knowledge and skills needed for Hi Efficiency Gas Furnaces.
The 90 Plus Gas Furnace training program explores the many aspects of installing, servicing, and diagnosing single and two-stage 90 plus gas furnaces as well as Modulating gas furnaces. Installing procedures discussed include converting the furnaces to meet various applications, Cat. IV venting, LP conversion, twinning, set up, and commissioning. Service and maintenance procedures include, sequence of operation (single. two-stage & modulating), key components, proper component diagnostics, and component replacement guidelines.
Date: Wednesday, January 15, 2025 at 9:00AM – 12:00PM
Instructed by Larry Marhofer & Dave Fletcher

FARMINGTON - TWO DAY 1/21/25 & 1/22/25 Mitsubishi M & P Service and Install Class
2025-01-21 08:30 - 2025-01-22 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – Tuesday, January 21 & Wednesday, January 22, 2025 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

TROY - 1/28/25 Hi Efficiency Gas Furnaces Training
2025-01-28 09:00 - 12:00 | TROY – YSC Learning Center, 2237 Elliott Dr, Troy, MI, 48083, United States
Acquire the in-depth knowledge and skills needed for Hi Efficiency Gas Furnaces.
The 90 Plus Gas Furnace training program explores the many aspects of installing, servicing, and diagnosing single and two-stage 90 plus gas furnaces as well as Modulating gas furnaces. Installing procedures discussed include converting the furnaces to meet various applications, Cat. IV venting, LP conversion, twinning, set up, and commissioning. Service and maintenance procedures include, sequence of operation (single. two-stage & modulating), key components, proper component diagnostics, and component replacement guidelines.
Date: Tuesday, January 28, 2025 at 9:00AM – 12:00PM
Instructed by Larry Marhofer & Dave Fletcher
