Young Supply Company

KALAMAZOO - 10/4/23 - Rheem Endeavor Overview & Updates Training
2023-10-04 09:00 - 12:00 (America/Detroit) | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
Rheem Endeavor Overview & Updates Training
Presented by Larry Marhofer or Dave Souva – Young Supply’s Rheem Technical Specialists
In this 3-hour class, taught by one of Young Supply’s Rheem Technical Specialists, Larry Marhofer or Dave Souva, you will become familiar with the new features of Rheem’s Endeavor line of indoor equipment.
In addition to being updated on all of the components and other DOE changes that have taken place, you will learn how to effectively use the Rheem App and the necessary changes for installation, operation, warranty registration, and repair.
No charge for this class. Thank you for choosing Young Supply & Rheem.

FLINT - 9/21/23 - Browning Belt Lunch & Learn
2023-09-21 12:00 - 13:00 | FLINT – Young Supply, 529 Kelso St., Flint, MI, 48506, United States
Class: Browning Belt Training
Instructor: Jim Arnold – Browning HVAC Specialist
When: Thursday, September 21, 2023 12PM – 1PM
Where: Young Supply FLINT – 529 Kelso St., Flint, MI 48506
Class Fee: No cost with lunch included.

Topics Covered in this one hour session:
•Safety • Browning Toolbox technician app • Belt construction • Belt types
• Belt Cross reference • Efficiency gains for end customers • Proper sheave alignment
• Proper belt tensioning • Retrofitting/Updating new latest belt and sheave technology
• They will be providing free reference guides & sheave gages

Doug Sandberg – Energy Advisor, Consumers Energy, will also be on hand to answer questions about rebate incentives related to Browning Belts.

CANCELLED - SAGINAW - 9/21/23 - Browning Belt Training hosted by Young Supply
2023-09-21 08:30 - 09:30 | SAGINAW – Young Supply, 125 Davenport Ave., Saginaw, MI, 48602, United States
THIS CLASS HAS BEEN COMBINED WITH THE AFTERNOON CLASS IN FLINT. PLEASE JOIN US THERE at 12PM. Thank you.
Class: Browning Belt Training
Instructor: Jim Arnold – Browning HVAC Specialist
When: Thursday, September 21, 2023 8:30AM – 9:30AM
Where: Young Supply SAGINAW – 125 Davenport Ave., Saginaw, MI 48602
Class Fee: No cost

Topics Covered in this one hour session:
•Safety • Browning Toolbox technician app • Belt construction • Belt types
• Belt Cross reference • Efficiency gains for end customers • Proper sheave alignment
• Proper belt tensioning • Retrofitting/Updating new latest belt and sheave technology
• They will be providing free reference guides & sheave gages
Doug Sandberg, Energy Advisor, Consumers Energy, will also be on hand to answer questions about rebate incentives related to Browning Belts.

FARMINGTON - 9/20/23 - Browning Belt Lunch & Learn
2023-09-20 12:00 - 13:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class: Browning Belt Training
Instructor: Jim Arnold – Browning HVAC Specialist
When: Wednesday, September 20, 2023 12PM – 1PM
Where: Young Supply FARMINGTON – 30300 W 8 Mile Rd., Farmington Hills, MI 48336 – 248-477-4900
Class Fee: No cost with lunch included.

Topics Covered in this one hour session:
•Safety • Browning Toolbox technician app • Belt construction • Belt types
• Belt Cross reference • Efficiency gains for end customers • Proper sheave alignment
• Proper belt tensioning • Retrofitting/Updating new latest belt and sheave technology
• They will be providing free reference guides & sheave gages
Doug Sandberg – Energy Advisor, Consumers Energy, will also be on hand to answer rebate incentive questions related to Browning Belts

FARMINGTON - TWO DAY 9/12/23 & 9/13/22 Mitsubishi M & P Service and Install Class
2023-09-12 08:30 - 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Instructed by Brent Cox – Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

KALAMAZOO - 8/23/23 - White Rodgers Training hosted by Young Supply
2023-08-23 11:00 - 14:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
Class: White Rodgers Training
When: August 23, 2023 – 11AM – 2PM
Where: Young Supply Kalamazoo – 5737 East Cork St., Kalamazoo, MI 49048 – 269-343-4625
Class Fee: $20 – includes lunch. No cost for Rheem Pro Partners

Topics Covered:
Outline below to focus on universal training and the newer NFC controls (50M56X-843, 50D50U-843 All Spark and the upcoming 50E47U-843 (launching soon).
Course Outline:
WR Mobile: Cross-Ref made easy
WR Connect app: simple customizable configuration with preloaded OEM configurations
Understanding NFC and the new tool in a contractors toolbox
Universal furnace controls: 10 controls to replace over 4000
HSI & All Spark live fire simulator
Working sim demo and onboard status fault diagnostic code troubleshooting
Flame sensor current troubleshooting – Test pin and digital display

CLASS FULL - FARMINGTON - 8/22/23 - White Rodgers Training hosted by Young Supply
2023-08-22 16:00 - 19:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
CLASS IS FULL
Class: White Rodgers Training
When: Tuesday, August 22, 2023 – 4PM – 7PM
Where: Young Supply FARMINGTON – 30300 W 8 Mile Rd., Farmington Hills, MI 48336 – 248-477-4900
Class Fee: $20 – includes dinner. No charge for Rheem Pro Partners

Topics Covered:
Outline below to focus on universal training and the newer NFC controls (50M56X-843, 50D50U-843 All Spark and the upcoming 50E47U-843 (launching soon).

Course Outline:
WR Mobile: Cross-Ref made easy
WR Connect app: simple customizable configuration with preloaded OEM configurations
Understanding NFC and the new tool in a contractors toolbox
Universal furnace controls: 10 controls to replace over 4000
HSI & All Spark live fire simulator
Working sim demo and onboard status fault diagnostic code troubleshooting
Flame sensor current troubleshooting – Test pin and digital display

TROY - 7/11/23 - EPA 608 Refrigerant Certification Review & Exam
2023-07-11 09:00 - 12:00 | TROY – Young Supply, 2237 Elliott Drive, Troy, MI, 48083, United States
EPA Certification Review and Exam instructed by Young Supply’s own Terry Tarantine.
Students must contact their local Young Supply branch prior to the class and purchase part # QT3000 for $148, which is the cost of the class. Prior to class day, students will self study from the book but can email the instructor, tjt@youngsupply.com , with questions.
The class will have a 25 question review from each of the EPA-608 sections and, after a question and answer period, the exam will be administered. Lead time on exam results is typically 2-3 weeks.

DOWNTOWN TOLEDO - 5/31/23 - ICE-O-MATIC Service School hosted by Young Supply
2023-05-31 16:00 - 18:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
ICE-O-MATIC Service School

Hosted by Young Supply and Instructed by Eric Diaz, Field Service Manager for ICE-O-MATIC.
This will be a hybrid class with in-person instruction by Young Supply’s Food Service Equipment Sales Team AND virtual instruction by Eric Diaz. Eric will be presenting this material live/exclusively for this Young Supply class, which will give you the opportunity to ask questions in real time.
Class materials and meal will be provided.
NO COST: Thank you for choosing Young Supply and ICE-O-MATIC

FARMINGTON - TWO DAY 05/30/23 & 05/31/23 Mitsubishi M & P Installation Essentials & Service Class
2023-05-30 08:30 - 2023-05-31 16:30 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Acquire the in-depth knowledge and skills needed to install and troubleshoot Mr. Slim M&P-series systems.
Throughout the 2-day Mr. Slim Service Course, you will be introduced to the concepts and theories of Mr. Slim system operation, including an in-depth functional study of the unique technologies employed. From there, you will move into detailed discussions surrounding the theories of properly applying, installing and troubleshooting Mr. Slim M&P-series systems. Concepts and theory are covered in the classroom and reinforced through practical hands-on exercises. Static displays and fully functional Mr. Slim systems are installed for system analysis and practical troubleshooting exercises.
Two Day Class – 8:30AM – 4:30PM both days
Class qualifies for 16 NATE approved hours
Two Day Class Instructed Larry Armes
PER MITSUBISHI – CLASS SIZE STRICTLY LIMITED TO 15 STUDENTS (Minimum of 8 students needed for class.)
Meal included.

FARMINGTON - 5/23/23 - "M1" OUTDOOR Equipment Training
2023-05-23 08:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
“M1” Indoor Equipment Training
Presented by Dave Fletcher – Rheem’s District Technical Manager & Larry Marhofer – Young Supply’s Rheem Technical Specialist

CLASS INFO
“M1” Mid-Tier OUTDOOR Equipment & Outdoor Board Training
Presented by Dave Fletcher & Larry Marhofer
The new DOE “M1” Requirements took place Januarty 1, 2023, which brought all kinds of equipment changes,including Rheem’s all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers.
In this four hour class, taught by Dave Fletcher and Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line of outdoor equipment.
In addition to being updated on all of the components and other DOE changes that took place, you will learn about the revamped compressors and the necessary changes for installation, operation, and repair.

At this time, this class is only open to Young Supply Rheem Dealers.
No charge for class.
PLEASE NOTE: This class will only cover outdoor units, outdoor boards, and compressors.

TRAVERSE CITY - 5/17/23 - Mitsubishi M&P Service Class
2023-05-17 08:00 - 12:00 | TRAVERSE CITY – Northwestern Michigan College – Room AL 102, 2525 Aero Park Dr., Traverse City, MI, 49686, United States
Mitsubishi M & P Service Class

Presented by Brent Cox & Larry Armes
Seminar Description: The Mitsubishi Field Service Seminar provides participants with an understanding of the fundamentals of Mitsubishi Ductless systems. During this 4-hour seminar you will be introduced to the concepts and theories of operation – including an overview of the unique technologies employed – system design, installation and the fundamentals of troubleshooting M-series and P-series systems.

Participants will be awarded 4 NATE continuing education credits and 0.4 IACET CEUs.

Target Audience: This course is recommended for personnel responsible for installing, servicing and conducting maintenance on Mr. Slim M- and P-Series Systems.

What you will learn:

Identify and discuss current product models
Describe the system components and characteristics
Interpret the system component specifications
Discuss system functionality and capabilities
Discuss the various technologies employed in Mitsubishi systems
Identify and define variables in system design
Identify and discuss the system installation procedures and requirements
Discuss the internal electrical and refrigerant circuitry of the system
Discuss Mitsubishi system troubleshooting and fault isolation procedures

OCILB Approved for 4 hours
CLASS FEE: $35 which covers the course book that will be handed out during the class and lunch. Will be billed the day of the class.

FARMINGTON - 5/16/23 - "M1" Indoor Equipment Training
2023-05-16 08:00 - 11:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements went into effect on Jan. 1, 2023, Rheem is ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this three hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.

CLASS FULL - FARMINGTON - 5/12/23 - ICE-O-MATIC Service School hosted by Young Supply
2023-05-12 08:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
THIS CLASS HAS REACHED CAPACITY

ICE-O-MATIC Service School
Hosted by Young Supply and Instructed by Eric Diaz, Field Service Manager for ICE-O-MATIC.
Class materials and meal will be provided.
NO COST: Thank you for choosing Young Supply and Blue Air

KALAMAZOO - 5/11/23 - ICE-O-MATIC Service School hosted by Young Supply
2023-05-11 08:00 - 12:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
ICE-O-MATIC Service School
Hosted by Young Supply and Instructed by Eric Diaz, Field Service Manager for ICE-O-MATIC.
Class materials and meal will be provided.
NO COST: Thank you for choosing Young Supply and Blue Air

SOUTH GRAND RAPIDS - 5/10/23 - ICE-O-MATIC Service School hosted by Young Supply
2023-05-10 08:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States

TRAVERSE CITY - 5/9/23 - ICE-O-MATIC Service School hosted by Young Supply
2023-05-09 17:00 - 21:00 | TRAVERSE CITY – Northwestern Michigan College – Room AL 102, 2525 Aero Park Dr., Traverse City, MI, 49686, United States

DOWNTOWN TOLEDO - 5/4/23 - Recovery & Evacuation Best Practices
2023-05-04 16:00 - 19:00 | DOWNTOWN TOLEDO – YSC Training Center, 1915 Monroe Street, Toledo, OH, 43604, United States
Class# DTOL050423
Recovery & Evacuation Best Practices
Presented by Jeff Hutton
Join us to review and demonstrate the proper way to ensure clean, dry and tight AC/R systems. We will also be covering techniques to dramatically speed up recovery and evacuation processes.
This session utilizes lecture, field examples, demonstrations & audience participation.
How to use Vacuum Science to increase speeds by up to 10x!

Vacuum hose size diameter & influence on system evacuation
Vacuum pump oil changes & moisture left in the system
The importance of brazing with nitrogen
The importance of using a high-accuracy digital vacuum gauge
Properly interpreting vacuum gauge micron readings
Importance of using vacuum-rated valve core removal tools
What micron readings are required & why they are important
R410A Refrigerants: ensuring safe, efficient, & reliable operation

Bring your Appion G5Twin with you for a HANDS-ON rebuild session!
Qualifies for 2 NATE Credit Hours or 2 Ohio CEUs

DOWNTOWN TOLEDO - 03/12/26 - Evacuation & Recovery Best Practices

Participant InformationCompany Name*Phone Number*Phone number will be used to contact you in the event of last minute changes to class. Attendee Name(s) - Use + sign after email field to add additional attendees*First NameLast NameEmail Email Address for class sign up confirmation email.*

Class Information
LOCATION: Young Supply Company DOWNTOWN TOLEDO Training Center
CLASS NAME: Evacuation & Recovery Best Practices
WHEN: March 12, 2026 4PM - 7PM

This field is hidden when viewing the form

Check Here if You Are Taking This Class For CEUs
This field is hidden when viewing the formX Class Fee ($40)includes class and meal.This field is hidden when viewing the form= TotalPayment InformationNo cost for this class - Thank you for choosing Young Supply.This field is hidden when viewing the formPlease Select a Method of Payment

Charge to my Young Supply Account

Cash / Check

Credit Card (Please call branch with credit card info 419-242-9494)
Young Supply Account #This field is hidden when viewing the formPO #CommentsSignaturePlease call the number listed below to process a credit card payment. CAPTCHA

TROY - 5/4/23 - Mitsubishi Training for Diamond Contractors and Prospects
2023-05-04 09:00 - 13:00 | TROY – YSC Learning Center, 2237 Elliott Dr, Troy, MI, 48083, United States
Hosted by Young Supply Company at our Troy branch.
Mitsubishi Electric Diamond Contractor Roundtable Meeting open to Mitsubishi Electric Diamond Contractor and Prospects. Meeting will be from 9AM – 12PM with lunch immediately following.
Please contact your Young Supply Salesperson or Mitsubishi Area Sales Manager for more information on this meeting.

FARMINGTON - 5/3/23 - Recovery & Evacuation Best Practices
2023-05-03 16:00 - 19:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Class# FAR050323
Recovery & Evacuation Best Practices
Presented by Jeff Hutton
Join us to review and demonstrate the proper way to ensure clean, dry and tight AC/R systems. We will also be covering techniques to dramatically speed up recovery and evacuation processes.
This session utilizes lecture, field examples, demonstrations & audience participation.
How to use Vacuum Science to increase speeds by up to 10x!

Vacuum hose size diameter & influence on system evacuation
Vacuum pump oil changes & moisture left in the system
The importance of brazing with nitrogen
The importance of using a high-accuracy digital vacuum gauge
Properly interpreting vacuum gauge micron readings
Importance of using vacuum-rated valve core removal tools
What micron readings are required & why they are important
R410A Refrigerants: ensuring safe, efficient, & reliable operation

Bring your Appion G5Twin with you for a HANDS-ON rebuild session!
Qualifies for 2 NATE Credit Hours or 2 Ohio CEUs

FRANKENMUTH - 5/3/23 - Mitsubishi Training for Diamond Contractors and Prospects
2023-05-03 09:00 - 13:00 | FRANKENMUTH – Zehnder’s, 1365 S Main Street, Frankenmuth, MI, 48734, United States
Hosted by Young Supply Company at Zehnder’s in Frankenmuth.
Mitsubishi Electric Diamond Contractor Roundtable Meeting open to Mitsubishi Electric Diamond Contractor and Prospects. Meeting will be from 9AM – 12PM with lunch immediately following.
Please contact your Young Supply Salesperson or Mitsubishi Area Sales Manager for more information on this meeting.

KALAMAZOO - 5/3/23 - Recovery & Evacuation Best Practices
2023-05-03 09:00 - 12:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
Class# KZO050323
Recovery & Evacuation Best Practices
Presented by Jeff Hutton
Join us to review and demonstrate the proper way to ensure clean, dry and tight AC/R systems. We will also be covering techniques to dramatically speed up recovery and evacuation processes.
This session utilizes lecture, field examples, demonstrations & audience participation.
How to use Vacuum Science to increase speeds by up to 10x!

Vacuum hose size diameter & influence on system evacuation
Vacuum pump oil changes & moisture left in the system
The importance of brazing with nitrogen
The importance of using a high-accuracy digital vacuum gauge
Properly interpreting vacuum gauge micron readings
Importance of using vacuum-rated valve core removal tools
What micron readings are required & why they are important
R410A Refrigerants: ensuring safe, efficient, & reliable operation

Bring your Appion G5Twin with you for a HANDS-ON rebuild session!
Qualifies for 2 NATE Credit Hours or 2 Ohio CEUs

FARMINGTON - 4/25/23 - "M1" Indoor Equipment Training
2023-04-25 08:00 - 11:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States

KALAMAZOO - 4/20/23 - Mitsubishi Training for Diamond Contractors and Prospects
2023-04-20 09:00 - 12:00 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
Mitsubishi Electric Diamond Contractor Roundtable Meeting open to Mitsubishi Electric Diamond Contractor and Prospects.
Please contact your Young Supply Salesperson or Mitsubishi Area Sales Manager for more information on this meeting.

SOUTH GRAND RAPIDS - 4/19/23 - Mitsubishi Training for Diamond Contractors and Prospects
2023-04-19 09:00 - 12:00 | SOUTH GRAND RAPIDS – Young Supply, 410 44th Street SW, Wyoming, MI, 49548, United States

TRAVERSE CITY - 4/18/23 - Mitsubishi Training for Diamond Contractors and Prospects
2023-04-18 09:00 - 12:00 | Traverse City – Northwestern Michigan Community College, 2600 Aero Park Drive, Traverse City, MI, 49686, United States

CLASS FULL - FARMINGTON - 4/13/23 - "M1" Indoor Equipment Training
2023-04-13 08:00 - 11:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
THIS CLASS HAS REACHED CAPACITY
“M1” Indoor Equipment Training
Presented by Larry Marhofer
As the new DOE Requirements went into effect on Jan. 1, 2023, Rheem is ready with the all-new Endeavor™ Line of Furnaces, Air Conditioners, Heat Pumps and Air Handlers. In this three hour class, taught by Larry Marhofer, Young Supply’s Rheem Technical Specialist, you will become familiar with the new features of Rheem’s Endeavor line and the other changes required with the new DOE Requirements.

At this time, this class is only open to Young Supply Rheem Dealers.

PLEASE NOTE: This class will only cover indoor units, furnace and air handlers, and the Contractor App. We will be having a different class in the spring that will cover outdoor units and the compressors.
THIS CLASS HAS REACHED CAPACITY

FARMINGTON - 4/7/23 - Blue Air Service Class hosted by Young Supply
2023-04-07 08:00 - 12:00 | FARMINGTON – YSC Tech Center, 30600 Eight Mile Rd., Farmington Hills, 48336, United States
Blue Air Service Class
Hosted by Young Supply and Instructed by Robert Endress, Service Manager for Blue Air with over 30 years of industry experience.
Class will cover the Blue Air line and how to diagnose and repair. Diagnostics, Compressors, Boards, Temp Controls & R290. There will be an open discussion with Q & A at the end of the class.
NO COST: Thank you for choosing Young Supply and Blue Air

CLIO, MI - 4/6/23 - Blue Air Service Class hosted by Young Supply
2023-04-06 08:00 - 12:00

KALAMAZOO - 4/5/23 - Blue Air Service Class hosted by Young Supply
2023-04-05 12:30 - 16:30 | KALAMAZOO – Young Supply Learning Center, 5737 East Cork St., Kalamazoo, MI, 49048, United States
